Precautions for the construction of glass mosaic

glass mosaic

The Glass Mosaic construction, you must not stick directly to the latex paint wall:

1.Determine the flat and clean construction surface. After the benchmark line is put, the cement or adhesives are put on average on the construction surface.
2.Paste the mosaic in order, and there should be an appropriate gap between each one. Every time you post it, the mosaic is flattened to determine that each place is compacted and the adhesive is fully combined.
3.Tear paper can be performed after drying the adhesive the next day. The sponge dipped in water and moisturizing the sticker. After the stickers are completely wet, the paper can be made.
4.Fill in the sewing. Use the tool to fully fill the gap in the sewing agent or the original binder, the white cement, etc.
5.Clean. Use wet sponges to clean the excess filling agent on the mosaic, and then wipe it with a dry cloth to complete the construction steps.
Note: The mosaic connected to the plastic network puts the plastic network on the construction surface with cement during construction, which can save step 3.
Contact Bluebird